Pagers, services & products only available to subscribers in the South Alabama area.

Setting Up Your Modem (TAPI Communications Setup)

Select Communications from the Setup menu. The Modem Selection dialog is displayed. The Modem Selection dialog lists all available modems on the current system. Click on the drop-down box to select the modem you wish to use. If you wish to modify the modem's configuration, click on the Advanced button to bring up the advanced properties dialog. Baud Rate: You must set the baud rate at 9600 or lower, depending on your modem. When you are finished with the modem selection and configuration, click on OK to finish the communications set up process. Note: InfoRad uses your Windows settings to determine what modems are available and how to dial phone numbers. To add or modify a modem or change the dialing properties in Windows, select Settings from the Start Menu, then select Control Panel, then select the Telephony or Modems icon, depending on your version of Windows. To set your dialing properties, select the "Dialing Properties" button from the Modems control panel.

Messaging Service Name This is where you insert the paging service provider. Enter "sharpcom" without the " in the text box as shown below.

InfoRad Paging Software Setup Instructions: Start | Step 1 | Step 2 | Step 3 | Step 4 | Features

These examples are designed for Sharp Communication Paging subscribers. If you are utilizing InfoRad paging software with another paging carrier, please contact your local pager carrier for the information that applies to you and their system. The Setup Wizard makes it easy to install in a couple of minutes. All you have to do is fill in the blanks with the proper information. When done, be sure to read your on-line help files for simple operating instructions.